Key answer: The most important point for Bitget deposits and withdrawals is to ensure that all four items—asset, network, address, and tag/memo—match before sending. Korean users must check account-holder verification between Upbit and Bitget, and the CODE Travel Rule integration requirements between Bithumb and Bitget. If it is an address being used for the first time, it is safer to make a small test transfer before sending the full amount.
Final verification: August 28, 2026. Supported assets and networks, minimum amounts, withdrawal fees, and the list of Travel Rule providers may change, so use the latest information displayed on the actual transfer screen and in the official sources below as the final reference.
Affiliate disclosure: This document contains an affiliate signup link for Bitget. CoinPop may receive compensation if eligible users sign up or trade, but readers incur no additional costs. The deposit and withdrawal procedures and evaluations of official sources were prepared independently of any affiliate relationship.
Bitget Deposits and Withdrawals at a Glance
| Step | Items that must be checked | Potential problems if incorrect |
|---|---|---|
| 1. Select the asset | Asset name, such as USDT, BTC, or XRP | Sending to an address for a different asset may make recovery difficult or impossible |
| 2. Select the network | Whether the networks on the sending and receiving screens are exactly the same | Deposit not credited, manual recovery request, or asset loss |
| 3. Check the address | The first and last characters of the latest copied deposit address | Sending to the wrong address or an address altered by an attacker |
| 4. Check the tag/memo | Whether a Destination Tag/Memo is required for assets such as XRP or XLM | The funds may reach the exchange's shared address without being automatically credited to the account |
| 5. Check the amount and costs | Minimum deposit amount, available withdrawal amount, and the network fee shown on the screen | Amount below the minimum or a lower-than-expected amount received |
| 6. Check security | KYC, 2FA, withdrawal address book, and security waiting period | Withdrawal rejection or delay, or account security risks |
| 7. Make a test transfer | First send a small amount that you can afford to lose under the same conditions | Discovering a configuration error only after sending a large amount |
1. Preparations before creating a deposit address
- Check the KYC status of your Bitget account and whether the service is available in your region of residence.
- Make sure you are logged in through the official app or official domain, not a phishing link.
- Check that the asset you intend to send is supported for deposits on Bitget and that deposits are not currently suspended.
- Check whether the sending exchange and Bitget support a common network.
- If this is an address being used for the first time, set up 2FA and a withdrawal address whitelist.
Bitget states in its official FAQ that identity verification is required to use core services. It also states that withdrawals may be temporarily restricted for risk-management purposes after changes to security settings, a password reset, or a login from a new device. These restrictions are different from blockchain transfer delays, so first check the reason displayed on the screen and the remaining time.
2. How to Deposit Coins to Bitget
- In the Bitget app or on the website, go to Assets → Deposit.
- Select the asset to deposit. Do not confuse assets with similar tickers.
- Select a network supported by both exchanges.
- Check whether the receiving account is Spot or Funding.
- Copy the generated deposit address and tag/memo separately.
- Paste the address and tag/memo into the withdrawal screen of the sending exchange.
- Recheck the asset, network, first and last address characters, and amount, and test with a small amount first.
- After a TxID is generated, wait until Bitget's minimum required number of confirmations has been reached.
Do not retrieve the address from an old memo or screenshot. Exchange deposit addresses may be updated due to policy or wallet infrastructure changes. It is safest to reopen and verify the address each time on the current Bitget deposit screen.
How to determine the correct network when names are similar
| Displayed example | Is it the same network? | How to check |
|---|---|---|
| Ethereum·ERC20 network designation | Generally refers to the same standard, but check the instructions on the screen | Compare the full network names and address formats on both exchanges |
| Tron·TRC20 network designation | A TRON-based network | Check whether the receiving screen supports TRC20 |
| BNB Smart Chain·BEP20 network designation | Generally part of the BSC family | Do not confuse it with BEP2; check the chain ID and instructions |
| Comparison of Arbitrum One and Ethereum networks | Different | Do not transfer if the networks differ, even if the addresses look the same |
| Comparison of Optimism and Base networks | Different | They are separate networks even though both use the EVM address format |
Do not assume that networks are the same merely because the addresses both appear to start with 0x. EVM-based chains may use the same address format while recording assets on different chains. Transfer only after directly selecting the identical network on both the sending screen and the Bitget deposit screen.
3. How to Withdraw Coins from Bitget
- Select the asset to withdraw under Assets → Withdraw.
- Select On-chain withdrawal and enter the receiving address.
- Select the same network supported by the receiving exchange.
- If required, enter the tag/memo and the receiving exchange and recipient information.
- Check the minimum withdrawal amount, withdrawal fee, and estimated amount to be received displayed on the screen.
- Complete the required security verification, such as email, mobile phone, or OTP verification.
- After submitting the withdrawal request, check its status and TxID. An on-chain transfer to an incorrect address generally cannot be canceled.
Withdrawal fees may vary depending on the asset, network, and congestion. Bitget's official fee information explains that deposits are not charged, but blockchain network costs may apply to withdrawals, and the exact amount is displayed on the withdrawal confirmation screen.
Calculating the actual amount received
If the withdrawal screen shows the requested amount as 1,000 USDT, the fee as F USDT, and the estimated amount received as R USDT, use R shown on the screen as the basis for the final determination. Under a typical deduction structure, R = 1,000 - Fhowever, the display method may differ by product and network, so prioritize the confirmation screen over performing your own calculation.
Choosing an unfamiliar network solely because its fee is cheaper may result in higher recovery costs and longer delays if the receiving exchange does not support it. It is best to choose in the order of support → safe receipt → cost.
4. Depositing to and Withdrawing from Bitget via Upbit
As of August 27, 2026, Upbit lists Bitget in its official VASP list as a virtual asset service provider integrated for account-holder verification. Account-holder verification applies to deposits and withdrawals with a KRW-converted value of KRW 1 million or more, and the name registered with Upbit and Bitget, in Korean or English, and the date of birth must match. For determining the KRW 1 million threshold, deposits are based on the Upbit rate at the time the funds arrive at the Upbit address, while withdrawals are based on the Upbit rate at the time of the request; the withdrawal fee is excluded from the amount used for the withdrawal determination.
- Verify that account information, including the Korean or English name and date of birth, matches between the two exchanges.
- On the Upbit withdrawal screen, select Bitget precisely as the recipient exchange.
- Choose an asset and network supported by both Upbit and Bitget.
- The point at which the 1 million KRW threshold is determined and whether withdrawal fees are excluded vary depending on the deposit and withdrawal circumstances, so check the information displayed on Upbit.
- Do not send large amounts to an account held in another person's name.
Upbit's list of supported providers and its applicable procedures may change. After entering the amount, if account-holder verification fails, check the name format, date of birth, and whether the account is a corporate or individual account, and do not repeatedly submit applications by force.
5. Depositing to and withdrawing from Bitget via Bithumb
Bithumb's official customer center identifies Bitget as a Travel Rule solution (CODE)-linked exchange. For withdrawals of 1 million KRW or more, you must enter the recipient exchange and recipient information, and the withdrawal may be rejected if the information differs from the recipient exchange's registered information.
- On the Bithumb withdrawal screen, select Bitget as the recipient exchange.
- Enter the recipient's name exactly as registered on the actual Bitget recipient account.
- Ensure that the asset, network, address, and tag all match.
- If the deposit is not automatically credited due to a CODE message delivery or API issue, check Bithumb's deposit request procedure and the TxID.
- If an FDS review or security restriction has been imposed, wait for the stated review period and prepare the materials requested by customer support.
6. Assets that require a tag or memo
Some assets require an auxiliary identifier to distinguish user accounts at a shared exchange deposit address, such as XRP's Destination Tag or XLM's Memo. If a tag or memo is displayed on the Bitget deposit screen, you must enter it together with the address.
| Situation | Recommended action |
|---|---|
| Before sending | Copy and enter the address and tag or memo again separately. |
| Already sent without a tag | Prepare the TxID, asset, amount, deposit address, and originally required tag, then use Bitget's procedure for uncredited deposits. |
| Incorrect tag entered | Stop any additional transfers and contact the support team immediately. |
| No tag entry field | Check whether the asset and network selections are correct and whether the receiving party is a personal wallet that does not use a tag. |
Manual recovery is not guaranteed, and a processing fee or additional evidence may be required. If you discover a problem, do not send another large amount to the same address.
7. Order of checks when a deposit is not credited
- Check whether the withdrawal status on the sending exchange is complete.
- Check whether the TxID exists on a blockchain explorer and has a successful status.
- Check whether the number of confirmations required by Bitget has been reached.
- Check whether the selected network is the same as Bitget's deposit network.
- Check whether the amount is at least the minimum deposit amount.
- Check that the tag or memo has not been omitted or entered incorrectly.
- Check whether deposits for the relevant asset are temporarily suspended on Bitget.
- If necessary, submit an official uncredited deposit request or customer support ticket.
When contacting customer support, do not send your password, OTP, private key, or seed phrase. Legitimate exchange staff will never request a private key or seed phrase. The materials generally required are your UID, TxID, asset and network, amount, address, tag or memo, time, and screenshots.
8. Order of checks when a withdrawal is delayed or rejected
| Status | Possible cause | Where to check |
|---|---|---|
| Processing | Internal security review or waiting for wallet processing | Bitget withdrawal history and notifications |
| No TxID | Not yet sent on-chain or under risk management review | Bitget status and security restrictions |
| TxID exists but not received | Insufficient network confirmations or waiting for the receiving exchange to credit it | Blockchain explorer and receiving exchange |
| Rejected | KYC, account-holder information, address format, or security authentication issue | Reason for rejection and support center |
| Suspended | Wallet maintenance, network upgrade, or risk management | Asset deposit and withdrawal notices |
General withdrawal problems can also be diagnosed in the same order. However, if a TxID has not yet been generated on the screen, first check whether the issue is likely an internal exchange security review or waiting for wallet processing rather than a blockchain problem.
9. 60-second checklist before sending
- Is it the official app or domain?
- Are the asset being sent and the asset being received exactly the same?
- Are the network selections on both sides exactly the same?
- Did you open the current deposit address again and copy it?
- Is this an asset that requires a tag or memo?
- Did you check the minimum amount, withdrawal fee, and expected amount received?
- Do you satisfy Upbit and Bithumb's Travel Rule and account-holder requirements?
- Did you compare the first six and last six characters of the address again?
- If this is a route you are using for the first time, did you conduct a small test transfer?
- Has clipboard malware not altered the address?
10. Bitget-related guides
- Comprehensive guide to Bitget fees, sign-up, and exchange services
- How to verify the application of a Bitget referral code and guidance for existing accounts
- Comparison of Bybit and Bitget fees, futures, and copy trading
Frequently asked questions
How much is the Bitget deposit fee?
Bitget explains in its official fee information that it does not charge a platform deposit fee. However, the sending exchange's withdrawal fee and blockchain network costs may apply.
Is the Bitget withdrawal fee fixed?
It cannot be assumed to be a fixed amount. It may vary depending on the asset, network, and congestion, so check the fee and estimated amount received displayed on the withdrawal confirmation screen.
Can I send 1 million KRW or more from Upbit to Bitget?
As of August 27, 2026, Upbit identifies Bitget as an account-holder verification-linked provider. Your account information must match, and you should make a final check of the eligible provider, asset, and network support status on the actual withdrawal screen.
Are Bithumb and Bitget connected under the Travel Rule?
Bithumb's official customer center includes Bitget in its list of CODE Travel Rule-linked exchanges. For withdrawals of 1 million KRW or more, you must enter the recipient exchange and recipient information accurately.
Can a transfer be canceled if I select the wrong network?
It generally cannot be canceled after the on-chain transfer is complete. The support teams may be able to help only if both the sending and receiving platforms support the network and recovery is technically possible; recovery is not guaranteed.
Can I continue reusing the deposit address?
Even if a previous address may remain valid, it is safer to recheck the address and network on the current deposit screen every time. This reduces the risk of missing an address-change notice or using an incorrectly saved address.
Official sources
- Bitget official website deposit guide
- Bitget official deposit and withdrawal fee information
- Bitget official guide to resolving uncredited deposits
- Bitget official KYC FAQ
- Bitget official withdrawal restrictions guide
- Upbit official guide to account-holder verification linkage
- Upbit official criteria for determining 1 million KRW
- Bithumb official Travel Rule withdrawal guide
- Bithumb Official Solution Integration Deposit Delay Notice
- Upbit Official List of VASPs Supporting Deposits and Withdrawals
- Official List of Exchanges Integrated with Bithumb CODE
Risk Notice: Cryptocurrency transfers involve the risks of address or network errors, changes to exchange policies, security reviews, network congestion, and fluctuations in asset prices. This article provides procedural information and does not constitute investment or legal advice.
